Solid Augers

Solid Augers

Solid augers have a hex shank (pin) up and a hex socket (box) down. The standard length is 5' with other length sections available. All Mills Machine built solid augers have hard surface coating on the outer flighting edge. *Solid Auger diameters are designated by the hole diameter cut by the solid auger cutter head. The actual diameter of the auger is smaller so the auger flighting conveys the cuttings and the cutter head does the work. See "Auger Diameter" column above for actual diameter of the auger.

DescriptionPart #HexPitchAuger DiameterLbs.Kg
1 11/16" Diameter Center Tube with 1 1/8" Hex Shank
3 1/2" Hole SizeSA3121181 1/8"3"3 7/16" O.D3515.9
4 1/2" Hole SizeSA4121181 1/8"3"4" O.D3917.7
5" Hole SizeSA5001181 1/8"4"4 1/2" O.D.4018.1
6" Hole SizeSA6001181 1/8"5"5 1/2" O.D.4319.5
2 3/8" Diameter Center Tube with 1 5/8" Hex Shank
4 1/2" Hole SizeSA4121581 5/8"3"4" O.D.4821.8
5" Hole SizeSA5001581 5/8"4"4 1/2" O.D.5223.6
6" Hole SizeSA6001581 5/8"5"5 1/2" O.D.5324
7" Hole SizeSA7001581 5/8"5"6" O.D.6228.1
8" Hole SizeSA8001581 5/8"7"7" O.D.6328.6
2 7/8" Diameter Center Tube with 1 5/8" Hex Shank
9" Hole SizeSA9001581 5/8"7"7 7/8" O.D.7734.9
10" Hole SizeSA10001581 5/8"8"8 7/8" O.D.8739.5
10” Hole SizeSA10002002”8”8 7/8” O.D.9040.8
12" Hole SizeSA12001581 5/8"9"10" O.D.10246.3
12” Hole SizeSA12002002”9”10” O.D.10547.6