Hollow Auger Post Extractor
Post Extractors are a fast and easy way to remove highway posts and other posts. It fits over the top of the post and removes dirt and cement from around the post for fast and easy removal.
Hollow Stem Wash Tees
Used for mud rotary drilling, the hollow stem wash tee has a pipe thread coupling located on the side of the tube (2″ NPT on the smaller sizes and 3″ NPT on the larger sizes). Wash Tees have tool joints that are the same as the auger string. We can supply special tool joints to […]
Hoisting Assemblies
The hoisting assembly is used to lift the auger string hoist and features a heavy-duty wire cable bridal assembly with two snap on safety hooks. Description Part # Lbs. Kg 2 1/4″ (57 mm) DK AHA2142 20 9.1 3 1/4″ (83 mm) DK AHA3142 21 9.5 3 1/4″ (83 mm) DK HD AHA3142HD 21 9.5 […]
Hex Extension Rods
Hex Extension Rods are used to compensate for the drill base height above the ground and to extend the drive cap. Description Part # Lbs. Kg Solid Rods 1 5/8″ (41.3 mm) Hex Pin to 1 5/8″ (41.3 mm) Hex Box – 5′ (1524 mm) length AEXT158-5 – – Adjustable Rods 1 5/8″ (41.3 mm) […]
Drill Rod
Auger Drill Rod is available in the following sizes: Description Part # Lbs. Kg AW Drill Rod – 5′ (1524mm) AW Drill Rod – 10′ (3048 mm) ADR10AW 45 20.4 AWJ Drill Rod – 5′ (1524mm) AWJ Drill Rod – 10′ (3048 mm) ADR10AWJ 49 22.2 NW Drill Rod – 5′ (1524mm) NW Drill Rod […]
Concrete Bullet Bits
Concrete Bullet Bits are specially designed to drill through concrete to set manhole covers and give access to the earth below the concrete. The bits feature our inexpensive field-replaceable bullet carbide cutters, which rapidly penetrate to make a clean round hole. They are not manufactured to drill below the concrete. Our Concrete Bullet Bits are […]
Auger Tool Joints
Mills Machine sells auger tool joints on an as-needed basis for repair of Mills augers. Pin Tool Joints Description Part # Lbs. Kg. Double Key 2 1/4″ (57mm) DK Pin Tool Joint ATJ2142P 6 2.7 3 1/4″ (83mm) DK Pin Tool Joint ATJ3142P 7 3.2 3 3/4″ (95mm) DK Pin Tool Joint ATJ3342P 6 […]
Auger Retrievers/Internal Fishing Tools
Auger Retrievers/Internal Fishing Tools are used to retrieve Hollow Stem Augers lost down-hole. Manufactured for specific auger I.D.s, all of our fishing tools feature heat-treated, case-hardened threads which can cut into the I.D. of both standard and heavy duty tapered augers. Mills Machine stocks threaded ends and tool joints to give fast response to your […]
Auger Plugs
Auger plugs are used to block the ID of the auger when drilling without the pilot bit. Plugs may be left in the hole when sampling or the sampling tube will pass through the flex plug. High Density Polyethylene Auger Plugs Description Part # Lbs. Kg 3 1/4″ High Density Polyethylene Auger Plug APEP314HD – […]
Auger Pilot Bits
Auger Pilot Bits are designed to fit snugly into the center of the auger I.D. for drilling without sampling. The Auger Pilot Bit O.D. is 1/8″ smaller than the I.D. of the auger. Designed to match the Auger Cutterhead style, the Auger Pilot Bit compliments the cutterhead for smooth, rapid drilling. Apex Pilot Bits Description Part # […]