Description
All 3 1/4″ (83mm) Double Key Hollow Stem Augers feature a continuous hardfaced flighting design, 3/8″ (9.5mm) thick on the outer edge with a 5″ pitch. The tool joints are made from 4142 alloy steel and feature single-bolt connections.
| Description | Part # | Lbs. | Kg. | |
| Auger Section | ||||
| 1 | 3 1/4″ (83mm) DK Hollow Stem Auger 3 1/4″ (83mm) I.D. x 6 5/8″ (168mm) O.D. x 5′ (1524mm) | A314200 | 81.0 | 36.7 |
| 2 | 3 1/4″ (83mm) DK Drive Cap with 1 5/8″ (41mm) Hex Pin | ADC314210 | 22.0 | 10 |
| 2 | 3 1/4″ (83mm) DK Drive Cap with 2″ (51mm) Hex Pin | ADC314211 | 23.0 | 10.4 |
| 3 | #3 Nut & Bolt for Rod-to-Cap Adapter | ANAB3 | 0.9 | 0.4 |
| 4 | 3 1/8″ (79mm) Pilot Bit Connector (AW Box – 4 Thd N-Rod Box) | APBC318AWB | 11.0 | 5 |
| 4 | 3 1/8″ (79mm) Pilot Bit Connector (AWJ Box – 4 Thd N-Rod Box) | APBC318WJB | 12.0 | 5.4 |
| 4 | 3 1/8″ (79mm) Pilot Bit Connector (NW Box – 4 Thd N-Rod Box) | APBC318NW | 8.0 | 3.6 |
| 4 | 3 1/8″ (79mm) Pilot Bit Connector (NWJ Box – 4 Thd N-Rod Box) | APBC318NWJ | 11.0 | 5 |
| 5 | Rod-to-Cap Adapter – AW Pin | ARCAAWP | 3.0 | 1.4 |
| 5 | Rod-to-Cap Adapter – AWJ Pin | ARCAAWJP | 3.0 | 1.4 |
| 5 | Rod-to-Cap Adapter – NW Pin | ARCANWP | 7.0 | 3.2 |
| 5 | Rod-to-Cap Adapter – NWJ Pin | ARCANWJP | 6.0 | 2.7 |
| 6 | AW Drill Rod – 5′ (1524mm) | ADR5AW | 21.0 | 9.5 |
| 6 | AWJ Drill Rod – 5′ (1524mm) | ADR5AWJ | 23.0 | 10.4 |
| 6 | NW Drill Rod – 5′ (1524mm) | ADR5NW | 31.0 | 14.1 |
| 6 | NWJ Drill Rod – 5′ (1524mm) | ADR5NWJ | 35.0 | 15.9 |
| Auger Repair Parts | ||||
| 1A | 3 1/4″ (83mm) DK Pin Tool Joint | ATJ3142P | 7.0 | 3.2 |
| 1B | 3 1/4″ (83mm) DK Box Tool Joint | ATJ3142B | 6.0 | 2.7 |
| 7 | ALB2 Auger Lock Bolt | ALB2 | 0.3 | 0.1 |
| 8 | ABN2 Auger Bushing Nut | ABN2 | 0.3 | 0.1 |
| 9 | ADK1 Auger Drive Key | ADK1 | 0.3 | 0.1 |
| Auger Cutterheads and Pilot Bits | ||||
| 10 | 3 1/4″ (83mm) DK Blade Cutterhead – 7 1/2″ (190mm) O.D. | ACH314250 | 11.0 | 5 |
| 10 | 3 1/4″ (83mm) DK Spade Cutterhead – 7 1/2″ (190mm) O.D. | ACH314251 | 12.0 | 5.5 |
| 10 | 3 1/4″ (83mm) DK Blade/Bullet Cutterhead – 7 1/2″ (190mm) O.D. | ACH314260 | 14.0 | 6.4 |
| 10 | 3 1/4″ (83mm) DK Spade/Bullet Cutterhead – 7 1/2″ (190mm) O.D. | ACH314261 | 9.0 | 4.1 |
| 10 | 3 1/4″ (83mm) DK Bullet Cutterhead – 7 1/2″ (190mm) O.D. | ACH314270 | 10.0 | 4.5 |
| 10 | 3 1/4″ (83mm) DK 5-T Cutterhead – 7 1/2″ (190mm) O.D. | ACH314271 | 10.0 | 4.5 |
| 11 | 3 1/8″ (79mm) Apex Pilot Bit, 4-Thrd N-Rod Pin | APB318APX | 2.5 | 1.3 |
| 11 | 3 1/8″ (79mm) Bullet Pilot Bit, 4-Thrd N-Rod Pin | APB318BUL | 5.0 | 2.3 |
