Description
All 3 3/4″ (95mm) Double Key Hollow Stem Augers feature a continuous hardfaced flighting design, 3/8″ (9.5 mm) thick on the outer edge with a 5″ pitch. The tool joints are made from 4142 alloy steel and feature single-bolt connections.
| Description | Part # | Lbs. | Kg. | ||
| Auger Section | |||||
| 1 | 3 3/4″ (95mm) DK Hollow Stem Auger 3 3/4″ (95mm) I.D. x 7 1/8″ (181mm) O.D. x 5′ (1524mm) | A334200 | 81 | 36.7 | |
| 2 | 3 3/4″ (95mm) DK Drive Cap with 1 5/8″ (41mm) Hex Pin | ADC334210 | 22 | 10 | |
| 2 | 3 3/4″ (95mm) DK Drive Cap with 2″ (51mm) Hex Pin | ADC334211 | 25 | 11.3 | |
| 3 | #4 Nut & Bolt for Rod-to-Cap Adapter | ANAB4 | 0.9 | 0.4 | |
| 4 | 3 5/8″ (92mm) Pilot Bit Connector (AW Box – 2 3/8″ API Reg. Box) | APBC358AWB | 8 | 3.6 | |
| 4 | 3 5/8″ (92mm) Pilot Bit Connector (AWJ Box – 2 3/8″ API Reg. Box) | APBC358AWJB | 11 | 5 | |
| 4 | 3 5/8″ (92mm) Pilot Bit Connector (NW Box – 2 3/8″ API Reg. Box) | APBC358NWB | 11 | 5 | |
| 4 | 3 5/8″ (92mm) Pilot Bit Connector (NWJ Box – 2 3/8″ API Reg. Box) | APBC358NWJ | 12 | 5.4 | |
| 5 | Rod-to-Cap Adapter – AW Pin | ARCAAWP | 3 | 1.4 | |
| 5 | Rod-to-Cap Adapter – AWJ Pin | ARCAAWJP | 3 | 1.4 | |
| 5 | Rod-to-Cap Adapter – NW Pin | ARCANWP | 7 | 3.2 | |
| 5 | Rod-to-Cap Adapter – NWJ Pin | ARCANWJP | 6 | 2.7 | |
| 6 | AW Drill Rod – 5′ (1524mm) | ADR5AW | 21 | 9.5 | |
| 6 | AWJ Drill Rod – 5′ (1524mm) | ADR5AWJ | 23 | 10.4 | |
| 6 | NW Drill Rod – 5′ (1524mm) | ADR5NW | 31 | 14.1 | |
| 6 | NWJ Drill Rod – 5′ (1524mm) | ADR5NWJ | 35 | 15.9 | |
| Auger Repair Parts | |||||
| 1A | 3 3/4″ (95mm) DK Pin Tool Joint | ATJ3342P | 6 | 2.7 | |
| 1B | 3 3/4″ (95mm) DK Box Tool Joint | ATJ3342B | 5 | 2.3 | |
| 7 | ALB2 Auger Lock Bolt | ALB2 | 0.3 | 0.1 | |
| 8 | ABN2 Auger Bushing Nut | ABN2 | 0.3 | 0.1 | |
| 9 | ADK1 Auger Drive Key | ADK1 | 0.3 | 0.1 | |
| Auger Cutterheads and Pilot Bits | |||||
| 10 | 3 3/4″ (95mm) DK Blade Cutterhead – 8 1/2″ (216mm) O.D. | ACH334250 | 16 | 7.3 | |
| 10 | 3 3/4″ (95mm) DK Spade Cutterhead – 8 1/2″ (216mm) O.D. | ACH334251 | 20 | 9.1 | |
| 10 | 3 3/4″ (95mm) DK Blade/Bullet Cutterhead – 8 1/2″ (216mm) O.D. | ACH334260 | 20 | 9.1 | |
| 10 | 3 3/4″ (95mm) DK Spade/Bullet Cutterhead – 8 1/2″ (216mm) O.D. | ACH334261 | 22 | 10 | |
| 10 | 3 3/4″ (95mm) DK Bullet Cutterhead – 8 1/2″ (216mm) O.D. | ACH334270 | 22 | 10 | |
| 10 | 3 3/4″ (95mm) DK 5-T Cutterhead – 8 1/2″ (216mm) O.D. | ACH334271 | 22 | 10 | |
| 11 | 3 5/8″ (92mm) Apex Pilot Bit, 2 3/8″ API Reg. Pin | APB358APX | 5 | 2.3 | |
| 11 | 3 5/8″ (92mm) Bullet Pilot Bit, 2 3/8″ API Reg. Pin | APB358BUL | 8 | 4.1 | |
